多点液压式波浪能海水淡化系统建模与仿真   总被引：1，自引：1，他引：0  

胡缘  杨绍辉  何宏舟  陈沪  郑松根  张迪 《海洋工程》2019,37(1):134-141

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。  相似文献   

Assessing the link between coastal morphology,wave energy and sea ice throughout the Holocene from Antarctic raised beaches          下载免费PDF全文

LAUREN MILLER SIMKINS  ALEXANDER RAY SIMMS  REGINA DEWITT 《第四纪科学杂志》2015,30(4):335-348

  相似文献   

Analytical method of radiation by a wave energy device with dual rectangular floating bodies     

WANG Wensheng  YOU Yage  ZHANG Yunqiu  WU Bijun  YE Yin 《海洋学报(英文版)》2010,29(3):106-115

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.  相似文献   

Jet instability and the stabilizing effect of topography on jets in two-layer rotating systems     

Don L. Boyer  Rui-Rong Chen 《地球物理与天体物理流体动力学》2013,107(1-3):45-70

Abstract

Laboratory experiments concerning azimuthal jets in two-layer rotating systems in the absence and presence of bottom topography aligned along the jets have been conducted. The jets were forced by the selective withdrawal of fluid from the upper layer of a two-fluid system contained in a circular dishpan geometry. The principal parameters measured in the experiments were the jet Rossby number, Ro, and a stratification parameter F = r ₁/(λ₁λ₂)^1/2 where r ₁ is the radius of the circular disc used for the selective withdrawal (i.e., r ₁ is the approximate radius of curvature of the jet) and λ₁,λ₂ are the internal Rossby radii of deformation in the upper and lower fluids, respectively.

The no-topography experiments show that for a sufficiently small F, the particular value depending on Ro, the jet is stable for the duration of the experiment. For sufficiently large F, again as a function of Ro, the jet becomes unstable, exhibiting horizontal wave disturbances from modes three to seven. An Ro against F flow regime diagram is presented.

Experiments are then conducted in the presence of a bottom topography having constant cross-section and extending around a mid-radius of the dishpan. The axis of the topography is in the vicinity of the jet axis forced in the no-topography experiments and the crest of the topography is in the vicinity of the interface between the two fluids (i.e., the front associated with the jet). The experiments show that in all cases investigated the jet tends to be stabilized by the bottom topography. Experiments with the topography in place, but with the interface between the fluids being above the topography crest, are shown to be unstable but more irregular than their no-topography counterparts.

Various quantitative measurements of the jet are presented. It is shown, for example, that the jet Rossby number defined in terms of the fluid withdrawal rate from the tank. Q, can be well correlated with a dimensionless vorticity gradient, V_G , across the upper layer jet. This allows for an assessment of the stability characteristics of a jet based on a knowledge of V_G (which can be estimated given a jet profile) and F.  相似文献   

庐山地区地表温度反演分析     

徐静波 《测绘与空间地理信息》2016,(1):122-124

研究庐山地区的地表温度,对于本地区的生态保护和开发具有重要意义。本文使用了目标区域内Landsat TM/ETM+从2000~2010年间共8幅影像数据,利用单通道算法和NDVI地表辐射率估算方法反演了区域内的温度场,并生成了历年温度对比效果图。分析推断目标区域内的温度场可能存在一个短年限的温度变化起伏规律,对庐山周边山区的影响有待进一步研究。  相似文献   

The first araripeneurine antlion in Burmese amber (Neuroptera: Myrmeleontidae)     

《Cretaceous Research》2016

Burmaneura minuta gen. et sp. nov., the first araripeneurine antlion in amber, is characterized, described and compared with the modern and Mesozoic Myrmeleontidae. The precise position of the fossil within this group is debatable. Interestingly, despite a rather rich fossil record, all Mesozoic Myrmeleontidae belong to subfamilies that are not recorded in the Cenozoic, although this might merely reflect the artificiality of the classification as the extinct groups may be paraphyletic with respect to their younger counterparts (e.g., Araripeneurinae may very well be nothing more than a stem group of no classificatory value).  相似文献   

东昆仑祁漫塔格山地区夏日哈木镍矿床矿物学特征   总被引：3，自引：0，他引：3  

丰成友  赵一鸣  李大新  刘建楠  刘长征 《地质论评》2016,62(1):215-228

青海夏日哈木是近年来新发现的超大型镍矿床,大地构造位置处于东昆仑造山带之东昆中花岗—变质杂岩带的隆起区,成矿与镁铁质—超镁铁质小侵入体有关,属岩浆深部熔离贯入型。矿体呈透镜状、似层状,主要产于辉石岩、橄辉岩和苏长岩中;矿石为块状、准块状、海绵陨铁状、浸染状、细脉状和斑杂状构造,粒状结构、交代结构和固溶体分离结构等。矿石金属矿物主要为磁黄铁矿、镍黄铁矿和黄铜矿,含少量和微量紫硫镍矿、马基诺矿、铬铁矿、磁铁矿、黄铁矿、闪锌矿、辉铋矿、钛铁矿和自然铋等;脉石矿物主要有斜方辉石、橄榄石、普通辉石、基性斜长石、镁铁闪石、直闪石、滑石、蛇纹石等。文中对夏日哈木和金川我国两个超大型镍矿的主要地质特征作了对比;与世界上主要同类型硫化物铜镍矿床相比较,夏日哈木镍矿具有不少独特的特征,如其成岩成矿时代相对较年轻,矿石中铜的品位较低、亏损铂族元素等。  相似文献   

四川龙门山地区早中泥盆世孢子化石研究   总被引：1，自引：0，他引：1  

黄敏  朱怀诚  刘锋 《地质论评》2016,62(6):1533-1548

本文系统研究了四川龙门山地区下泥盆统桂溪组、木耳厂组、观音庙组、关山坡组以及中泥盆统金宝石组的孢子化石,共鉴定孢子41属81种,建立了三个孢子组合带,由下至上分别是:Retusotriletes rotundus—Calamospora panucea(RP)孢子组合、Synorisporites downtoensis—Verrucosisporites scurrus(DS)孢子组合、Densosporites inaequus—Grandispora inculta(Ⅱ)孢子组合。通过与研究较为详细的西欧、北美地区的经典资料,包括老红砂岩大陆、北欧、加拿大等地区,以及国内相关资料的对比,结合特征种的地层分布、重要属种的含量、孢子大小等组合特征,确定RP组合时代为Lochkovian,DS组合时代为Pragian至早Emsian,Ⅱ组合时代为Eifelian中晚期—Givetian早期。这也是首次在金宝石组中发现孢子化石并对其进行研究。另外,通过对孢子直径的统计分析从另一个角度探讨了古植物的演化历程。  相似文献   

新疆三塘湖盆地牛圈湖区块异常低压成因及压力演化定量分析     

康媛  孙卫  盛军  时建超  刘艳妮  赵婷 《地质论评》2016,62(1):103-110

三塘湖盆地牛圈湖区块中生界侏罗系西山窑组储层具有典型的异常低压油藏特征,晚白垩末期储层达到最大埋深,此时下部芦草沟组烃源岩演化程度达到最大,随着油气持续向储层充注,此时地层压力达到最大,可达30.33~50.74MPa。本文从引起油藏异常低压的主要因素入手,定量分析了构造抬升与地层剥蚀、地层温度降低、成岩作用中的"耗水作用"以及矿物蚀变引起的自生体积缩小等因素对地层压力的影响。这些因素共同作用导致了地层压力降低,其中溶蚀作用中矿物蚀变所形成的"耗水作用",使地层压力下降24.4%~37.1%,是造成储层异常低压的首要因素,同时矿物蚀变导致自身体积缩小并导致储层压力下降16.5%~24.8%,地层温度降低和构造运动对储层压力降低影响相对较弱,降低幅度分别为7.9%~8.6%和4.8%~8.1%。以上种种因素的共同作用,使得地层压力下降17.45~37.85MPa,最终形成现今异常低压的分布格局。  相似文献   

桂林毛村不同植被类型土壤微生物数量与碳酸酐酶活性比较     

黄芬  黄艳梅  杨利超  白冰  曹建华 《地质论评》2016,62(1):94-102

以非岩溶区林地为对比,分析了桂林毛村岩溶区4种不同植被类型土壤微生物数量及碳酸酐酶(CA)活性的季度动态变化规律,发现以下主要结果:1随着植被的正向演替,岩溶区弃耕地、草地、灌丛及林地微生物数量及CA活性逐渐升高,微生物总数从64.07×10~4cfu/g上升到178.23×10~4cfu/g,CA活性从0.77 U/g上升到1.82 U/g,岩溶区林地大于非岩溶区林地。2在岩溶区不同植被类型,微生物组成均表现为细菌最多(平均值95.14%),放线菌次之(平均值2.79%),真菌数量最少(平均值1.75%)。而在非岩溶区表现为细菌最多(平均值90.95%),真菌次之(平均值5.32%),放线菌最少(平均值3.73%)。3微生物数量季节动态整体表现为春季至夏季逐渐上升,至秋季达到最高,冬季下降,微生物总数的增长依赖于细菌的倍数增长,真菌和放线菌影响较小。CA活性整体表现为夏季和冬季低于春季和秋季,秋季达到最大值。4 CA活性与细菌及微生物总数呈极显著的正相关,表明土壤CA主要来源于细菌的分泌。  相似文献